How To Get Netgear Router Login Page?

Many people struggle a lot in getting the Netgear Router login page. NETGEAR has some of the most robust routers in the market. These routers allow you to access the high-speed internet at home or in office environments with their robust devices. Home broadband routers basically have two IP addresses allotted to them. One IP address is used for local communication, inside a home network which is also called your private IP address which is now we have for Netgear Router login page. Moreover, the other IP address is used to connect to the networks outside of the local setting, that is your public IP address. The public address is provided by your internet service provider (ISP), whereas the private address is controlled by the administrator on the home network, i.e., your PC.

Netgear Router Login

So, if you have recently purchased a new Netgear router or have never changed or modified the local address before, your default IP address would be that of the NETGEAR router IP address or, as the manufacturer supplies it. So in order to make the necessary changes in the router settings, the administrator should know the Netgear router login IP for it to connect to the console.

The IP address of the wireless router is usually the default gateway address, which means it allows communication exclusively between its devices which are operating on different networks. This works in the form of a URL, by directing the web browser to the IP address.

How To Get Netgear Router Login Page?

The default NETGEAR Router Login IP is usually You can easily connect to the router through this URL by simply using the http:// followed by the above number. If doesn’t work, you can check the back sticker or label on the router, which contains the default login information along with the default username and password that helps to access Netgear Router.

How To Access Netgear Router IP?

The home router uses the private IP address by default unless manually changed by the administrator. Moreover, if you have noticed different IP addresses on your network, it is better to change the factory IP address to the one you want.

The default Netgear Router login IP can be changed during the initial installation process or can be changed later on. Changing the IP address does not affect other network settings like the DNS, subnet, or your Wi-Fi settings. Internet providers track and authorize home networks based on the routers public IP address and not the local one. Resetting the router will replace the network settings back to its factory settings along with local IP addresses, even though the administrator has changed it. Remember, resetting the router does not mean to have the saved settings. And turning the device On and Off or even power cuts do not change the configuration.

How to login to NETGEAR Router?

NETGEAR has its own service of websites, i.e., and These sites will work particularly only when accessed from NETGEAR routers. These websites allow users to access their consoles by username rather than IP addresses. This is easy to use as names are easier to remember than a number address. Follow these simple steps to know how you can log into your NETGEAR router.

1. Open any web browser like Chrome and go to or If your URL ends with .net and fails to open the login page, try using You can even use an Ethernet cable to connect the computer and the wireless router directly. website

2. Once you get the login page, fill in the following details on the login page, i.e., use ‘admin’ as your username and ‘password’ as your password. This is the default Netgear Router Login data.

default Netgear Router Login

Note: If these entries do not work, that means your username and password has been modified before, and you need to restore it back to its default settings by resetting the Netgear wireless router.

3. On clicking OK, you will be logged in to your NETGEAR router. Once you log in, you can change any settings as desired.


Can’t Login to Netgear Router?

If you still have problems with logging in or the login not working, here are some troubleshooting tips you can try

  • Reset the NETGEAR router to its original factory settings.
  • Reset the Username as well as the password.
  • Restart the router physically, by turning it On and Off.
  • Use a different Ethernet port or a new Ethernet cable if you are suspecting any physical damage.
  • Change the Netgear Router Login IP address on the admin page.
  • Disable any firewalls, or pop-up blockers installed, as these tend to block Javascript access.
  • The DHCP should always be enabled.
  • Try accessing from a different computer or another device.
  • Delete cookies and try logging in again.

That is it. I hope you got the Netgear Router login page with the help of the definitive guide to access the router settings.

1 thought on “How To Get Netgear Router Login Page?”

Comments are closed.