Turn your Windows 8 Laptop into Wifi Hotspot

2

Have you ever thought of making your Windows 8 Laptop into Wifi Hotspot? If not, then you might probably don’t know that it is possible to share the internet over other devices by creating personal HotSpot via Laptop. Ofcourse, it possible with Smartphones and can be enabled at a touch of button but what about Laptop.

Most of the Windows laptops come with inbuilt WiFi card which helps to share the existing network. It helps to access the ethernet internet over the air on the other devices likes laptops, smartphones etc. However, there are few limitations too. You need to check whether your laptop supports the sharing or not. If you laptop is capable of doing so, then proceed further to make your windows 8 laptop into WiFi hotspot without using any softwares like Connectify, VirtualRouter Plus etc.

Turn Windows Laptop into Wifi Hotspot

This tutorial is completely based on the commands. True, you don’t need to download or install any third party client software to perform this task of sharing internet connection over the air with any router. Follow the steps carefully to know how.

Turn Windows Laptop into Wifi Hotspot

1. Make sure to check whether your Windows laptop network adapter supports this feature or not. To do this, open command prompt with administrative privileges (this is must) and run the following command.

netsh wlan show drivers

turn windows 8 into wifi hotspot

If it returns “No” then it is not possible you to share the internet. If it shows “Yes” move further to step 2.

2. Now type the following command to switch on the sharable adapter

netsh wlan set hostednetwork mode=allow ssid=YourName key=AnyPassword

turn laptop into wifi hotspot windows 8

3. After switching on the network adapter, let’s share it by typing the command as follows

netsh wlan start hostednetwork

turn your windows 8 laptop into wifi hotspot

4. Check the statistics by typing the following command in order to turn laptop into Wifi Hotspot

netsh wlan show hostednetwork

Your are 80% done. Move ahead to score 100%.

Enabling Local Area Network to share the internet

1. Open command prompt and type “ncpa.cpl” without quotes.

2. It wil open up a window with lots of connection types. Select the one which is currently in active state (from which you are accessing Internet).

3. Right click on it and select “Properties

4. In the Sharing tab, check mark “Allow other network users to connect through this computer’s internet connection”. Confirm it by selecting “Ok“.

Now switch on the WiFi on other device(s). You will get SSID name. Select it and enter the password we have created in step 3 in first section to get connected.

In case if you struck at “Obtaining IP Address”, you should enter the IP address manually. Follow the procedure below

Showing Obtaining IP Address!

On your Smartphone, expand the options at WiFi settings and enter the IP address manually like 192.168.1.10 and Gateway as 192.168.1.1. Mostly, it works. If you are still getting any errors, please do let us know via comment section.

This is the best feature available in all windows machines. You don’t need any external software to make your Windows 8 laptop into WiFi HotSpot.

Check out the video tutorial for step by step procedure

2 COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here